Monthly Archives: March 2016

Choosing battery charger Tips

As you know, the battery is very necessary and popular in our life. It appears in every family.

With the advantage of no noise, no petrol consumption, being easy to use and cheaper than a generator, electricity is heated electronics market during power outages season. You need to select the battery with high quality and suitable for the power consumption of your family.

Are you wanting to buy a battery charger? So you should quickly “pocket” some important notes below, to help you choose a battery charger that is the best charger and run efficiently. Hope you enjoy my Choosing battery charger Tips.

charging-battery

Conditions for the operation of battery charger

First, it seems difficult to accept, but actually, investment and choice the best battery charger are more difficult and complex than choosing an electronic device that runs well with similar solvent. Because there will be many other factors to consider when charging in a solvent environment. The following conditions will affect to the operation of a battery charger, that are:

All these factors should be considered carefully if you want to choice and buy a battery charger that is suitable for your own demand.

Determine the correct type of the battery charger you need

To choose the right type of battery charger, you need to be equipped with the basic knowledge about the technical specifications of the type of battery you are using. Specifically, they are parameters to determine the input voltage, types of batteries and abilities to charge how many amps  per hour.

The input voltage of a conventional battery is 120 or 230 VAC. The capacity of the battery voltage is usually measured by “Ah” unit.

Some kinds of conventional batteries:

we often need the solution to add when the battery becomes dry. If you don’t fill acid solution promptly, batteries will lose the ability to charge, discharge, and be easily broken.

  • Battery without filling

It means users do not need to intervene by adding the new solution. For this product line, while still escaping gas charge but less filling product line.

It means that the air can’t escape. When the air can’t escape, the liquid in the battery can’t  “slip” out whether it was let in all postures.

There are two types of AGM battery: gel but an airtight type and gel with 100% dry type.

You can choose any types of them, however, that should be suitable for your demand and usage.

dry-agm-battery

Select the appropriate time for the battery charger is not overloaded

There are many ways to quickly make your battery become out of use (and you will be used a new battery, I’m kidding). It is very simple to find the reasons why it becomes wrong charger. One of those is that you uses wrong battery makes battery chargers become overloaded or under-charging. Overload charging can cause the battery overheat. If the battery is “filling” type the liquid inside it will quickly dry out and evaporate more. Generally, you are destroying your battery. The rate charged correctly for your battery can be calculated based on parameters “Ah”. The level of charge power is printed on the battery cover. And you should follow this number.

A safety chargeable rate is acceptable in the manufacturing industry is about 20% battery power level Ah recorded on your battery. This means that battery with a capacity of 100Ah ideal as it will be calculated at the rate of 20 ADC.

Choosing battery charger Tips Conclusion

There are many factors you need to consider before buying a battery charger. However, in this Choosing battery charger Tips, I have just focused on some mains and important factors and tips that need to look first. I expect you can apply all tips that I have shared when choosing battery charger. Hope you have a right choice.

Thank you!