Category Archives: DIY

How to buy the best solar battery

solar-battery

With the vast growth due to industrialization, there have arisen a number of major issues in our daily lives that are related to the environment and the atmosphere. The rapid advancement towards a better quality of life through cheap and convenient machines has been met with the earth regressing towards destruction, as its condition is worsening due to these issues. The pollution through industrialization and global warming are merely two of these issues. One such issue is the energy crisis that the planet is facing due to its depleting natural resources, such as crude oil, natural gas, and other fossil fuels. These are known as non-renewable resources, and production of energy through these resources provides an unsustainable form of energy for its users.

In order to protect the earth from such ecological damages by human activity, it is important to seek out other methods of generating renewable energy. One such method is to extract the energy from the sun, usually known as generating solar energy. Since the light from the sun does not seem to be depleting in any manner, the power generated from solar energy presents an incredible potential as a major renewable source of energy. This is why having sufficient knowledge about solar batteries along with solar panels is an important need of the people.

Since its discovery, many companies have joined the market and begun producing several products relating to the ecological solar power generation. One of these products is the solar battery that is used with the solar panels for storing the electrical energy generated from the sun. The huge number of brands available in the market presents a plethora of different choices of batteries, so it is not an easy task to search for the best battery that would be suitable for one’s solar system.

Choosing the best solar battery

Here, we will look at some factors that need to be considered before buying a solar battery and other aspects that determine the battery one should get for themselves.

Needs

It might be unclear to what this means, so here is an explanation. Basically, this is considering the main purpose the solar batteries are needed for. These batteries are not generally used to support the electrical system of a whole building or a floor. The solar systems are used as energy reserves in cases of outages, or they are used to power a few of the functions in an electrical system. If the solar energy needs to power one critical appliance, the solar battery that will be required for the purpose must have a greater capacity compared to the batteries used to power a few lights. To make the perfect choice, knowing the purpose of the battery is of utmost importance.

Budget

Budget, undoubtedly, secures the second place in determining what solar battery to buy since one cannot buy something that they cannot afford. Solar batteries are an expensive equipment which is supposed to run for years. They pay off in the long term, but the initial investment in these batteries can prove to be substantial, even unaffordable, for some people. However, there is not much to worry about regarding this since these batteries and systems are getting popular. Their popularity has invited new brands to participate in the market, introducing more competition and lowering the cost of batteries significantly in the process. However, a budget must be set for the battery instead of purchasing it on an impulse.

Know the battery

In order to buy the most suitable battery, it is important to know the process of analyzing a battery.

The first step in understanding the battery is to know the chemistry of the battery that is best suited for a person’s solar energy system. Without having general information about the chemistries different batteries utilize, it is probable that one can end up with the wrong battery or may not end up with the battery that suits their system the most. These chemistries are:

Lead-acid batteries

These batteries are made for different purposes, and some of these batteries might not be great for a solar electric system. Most of them are used in industries that require starter applications to provide a burst of power to the machines in order to kick start them. These batteries are not suitable here. However, UPS lead-acid batteries might work very well with these renewable energy (RE) systems.

Deep-cycle batteries

These batteries are made to deliver electricity for a long period of time that can last for several days. They are designed for constant charge and discharge cycles. However, they are still a bit different from renewable energy systems as the RE-specific batteries are designed for the sole purpose of being compatible with the renewable energy systems.

Flooded batteries

Flooded batteries are the most commonly used batteries in all types of renewable energy and grid backup systems. They come at a lower price compared to other battery technologies and are more reliable and long lasting. However, they require regular maintenance as the water content in the electrolyte of these batteries keeps on decreasing with time since the hydrogen and oxygen gases are released outside the battery.

Gel batteries

These batteries are similar to flooded batteries, except that they have a thicker paste of electrolyte and they conserve the discharged hydrogen and oxygen gases to combine them back together to form water. Therefore, these batteries do not need any maintenance. However, they are more expensive than flooded batteries.

Analyze the quality

Once the type of battery that would suit a certain solar electric system becomes clear, it is important to recognize the quality of those batteries. Not to worry since the quality control task is done by most battery companies on their products and they have different labels stating how a battery is eligible for certain safety standards.

Tips to Wire a Golf Cart Battery

Tips to Wire a Golf Cart Battery

Tips to Wire a Golf Cart BatteryElectric golf carts are usually operated by a set of six batteries, relying on what kind of model car you have bought. The batteries are crafted to offer a persistent charge to back up propulsion of the cart during the duration of a playing day. As for the reason that batteries are installed into a battery bank, their wiring is dissimilar from an automobile. An ordinary job for those who own golf carts is to have their golf cart batteries wired, when swapping them or eliminating for cleaning purposes.

How to Find the Location of the Golf Cart Batteries

Go and open the battery section of your golf cart by forcing up the seat out of the cart. Golf cart battery sets are usually situated underneath the seat of the cart.

How to Take Out the Cable from the Battery Bank

Get rid of the black negative cable from the first battery in the set, followed by the consequent positive wire. You will do this for each single battery in the set, exactly in the same form by moving from forward to back in the battery bank.

Talking About the Battery Bank

Pull up the batteries that need eradication from the battery bank. Certain battery sets are created to grip each single battery in its place with the help of a battery clip that will need a basic wrench to eliminate the protecting nut and washer from the bracket.

Always Place the Batteries in the Same Way

Position the new batteries into the set in the same form you did when you removed the battery from its sitting. Re-protect the safety brackets for each new single one of the battery.

The Method of Reattaching the Cables

  1. Reattach the battery cables to the batteries in the set.
  2. The primary positive lead for the battery bank approaching from the frame of the cart will connect to the positive station of the first battery in the set.
  3. Then, attach a cable from the negative station of the first battery to the positive station of the following battery in the bank.
  4. Carry on connecting the negative terminal to the next positive terminal, till all of the batteries are safely connected.
  5. The last battery in the set will have a link from its negative station to that of the frame or golf cart controls.

Talking About the Positive Cable

Connect the opposite positive cable to any of the positive stations on the battery bank. This will be the surplus positive cable that you detach when eradicating the batteries. This is the cable that is what powers the engine, when the cart shifts in the opposite side.

Choosing battery charger Tips

As you know, the battery is very necessary and popular in our life. It appears in every family.

With the advantage of no noise, no petrol consumption, being easy to use and cheaper than a generator, electricity is heated electronics market during power outages season. You need to select the battery with high quality and suitable for the power consumption of your family.

Are you wanting to buy a battery charger? So you should quickly “pocket” some important notes below, to help you choose a battery charger that is the best charger and run efficiently. Hope you enjoy my Choosing battery charger Tips.

charging-battery

Conditions for the operation of battery charger

First, it seems difficult to accept, but actually, investment and choice the best battery charger are more difficult and complex than choosing an electronic device that runs well with similar solvent. Because there will be many other factors to consider when charging in a solvent environment. The following conditions will affect to the operation of a battery charger, that are:

All these factors should be considered carefully if you want to choice and buy a battery charger that is suitable for your own demand.

Determine the correct type of the battery charger you need

To choose the right type of battery charger, you need to be equipped with the basic knowledge about the technical specifications of the type of battery you are using. Specifically, they are parameters to determine the input voltage, types of batteries and abilities to charge how many amps  per hour.

The input voltage of a conventional battery is 120 or 230 VAC. The capacity of the battery voltage is usually measured by “Ah” unit.

Some kinds of conventional batteries:

we often need the solution to add when the battery becomes dry. If you don’t fill acid solution promptly, batteries will lose the ability to charge, discharge, and be easily broken.

  • Battery without filling

It means users do not need to intervene by adding the new solution. For this product line, while still escaping gas charge but less filling product line.

It means that the air can’t escape. When the air can’t escape, the liquid in the battery can’t  “slip” out whether it was let in all postures.

There are two types of AGM battery: gel but an airtight type and gel with 100% dry type.

You can choose any types of them, however, that should be suitable for your demand and usage.

dry-agm-battery

Select the appropriate time for the battery charger is not overloaded

There are many ways to quickly make your battery become out of use (and you will be used a new battery, I’m kidding). It is very simple to find the reasons why it becomes wrong charger. One of those is that you uses wrong battery makes battery chargers become overloaded or under-charging. Overload charging can cause the battery overheat. If the battery is “filling” type the liquid inside it will quickly dry out and evaporate more. Generally, you are destroying your battery. The rate charged correctly for your battery can be calculated based on parameters “Ah”. The level of charge power is printed on the battery cover. And you should follow this number.

A safety chargeable rate is acceptable in the manufacturing industry is about 20% battery power level Ah recorded on your battery. This means that battery with a capacity of 100Ah ideal as it will be calculated at the rate of 20 ADC.

Choosing battery charger Tips Conclusion

There are many factors you need to consider before buying a battery charger. However, in this Choosing battery charger Tips, I have just focused on some mains and important factors and tips that need to look first. I expect you can apply all tips that I have shared when choosing battery charger. Hope you have a right choice.

Thank you!

Review/10Pcs PCB Carbide Micro Drill Bits 0.3mm to 1.2 mm

This is a decent arrangement in a tiny flexible casing. Pleasant paint coding, however the dimension marks are small. For older folks plus others, it would receive a fine dash to ensure a ‘Table Tag’ on the carton, displaying in large figures the dimension and where it exists in the carton.

Proportion reach is immense; class is as it has to be. Not ever imagine any product of PCB Micro Drills to continue always, they don’t. Keep in mind that they are working over fiberglass secure things maximum whiles, or comparable hard matter, they will gray out. As soon as they wear out, throw them away and substitute the separate bit.

Utilize a suitable mechanism considered for PCB drilling, etc. Not fit for a hand drill, you will destroy them in minutes. All makes need to be specifically organized.

PCB-Carbide-Micro-Drill-Bit

Product Description

  • Shank Diameter: approx. 1/8″ (3.175mm)
  • The slicing ends firmly evade fractional hole, certify the excellence.
  • 10pcs Carbide Micro Drill 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2mm

Technical Details

  • Quantity Amount: N/A
  • Article Mass: 1.4 ounces
  • Produce Measurements: 1.5 x 0.3 x 0.3 inches
  • Article Type Amount: N/A
  • Stuff: Carbide
  • Dimension Structure: Metric

Reviews of Customers

Tough to Catch Piece

These carbide drill bits equip the DREMEL 1/8 Drill Collet and function prodigious. They arrive in a stress free to practice pliable container, with a frame for every bit. Take care to mark definite, all the bits are in the container before you shut it, as I have by now misplaced two of the bits to fracture, when shutting the cover on them. My fault, these bits shield the micro series of your drill collections. Micro as in drilling welds in 1/72 gauge aircrafts.

PCB Print Circuit Board 0.3 to 1.2 mm

  • Extremely helpful and incredibly strident bits
  • Upright class, correct in my DREMEL like unique device
  • I endorse, merely the release interval is lengthy; however it is not a huge issue.

Prodigious Carbide Tip Drills

You must use a press. Or else these drills will collapse. They are awfully stiff, but atone for it in life spell.

The Ones you need

I bought this array austerely for PCB labor. Nevertheless, I only instructed one array to give them a try and comprehend how they hit the mark. For the value you can’t outdo the worth. I will certainly purchase a pair of additional, just to ensure them as a standby.

During evaluation concluded from the appraisals, I’ve observed that selected critics have wrecked their bits. Honestly, the bits are simple to shatter if you are careless and don’t conduct them appropriately. These are “precession” bits; necessitating persistence, maintenance, and the correct device for the work (Drill Press).

If you are in search of a good value series of bits and occupied with PCBs, aim for it. It procures a lengthy stretch to take delivery of, but worth the time lag.

Might not be the Gadget you Lack

Entirely all but one shattered on the first circuit panel, and sure, it was in a still drill press and the panel was protected in an x-y vice. I discovered them to be very stiff and the ones I used didn’t even perfect one hole in a solitary sided fiberglass circuit panel.

Pleased Luthier

I’m a luthier, construct and patch-up stringed implements and I wanted these decent series of micro bits to do extremely minor drilling for banjo points. I had a collection of HSS micro bits, but they twisted and ruptured if you beheld them improperly. These are carbide and after I used them in Ebony, very durable wood, they cut gorgeously. I would mention these if you need micro holes. Never attempted it on metallic; however that isn’t why I acquired them.

PCB-Carbide-Drill-Bit