Category Archives: Tech

Choosing battery charger Tips

As you know, the battery is very necessary and popular in our life. It appears in every family.

With the advantage of no noise, no petrol consumption, being easy to use and cheaper than a generator, electricity is heated electronics market during power outages season. You need to select the battery with high quality and suitable for the power consumption of your family.

Are you wanting to buy a battery charger? So you should quickly “pocket” some important notes below, to help you choose a battery charger that is the best charger and run efficiently. Hope you enjoy my Choosing battery charger Tips.

charging-battery

Conditions for the operation of battery charger

First, it seems difficult to accept, but actually, investment and choice the best battery charger are more difficult and complex than choosing an electronic device that runs well with similar solvent. Because there will be many other factors to consider when charging in a solvent environment. The following conditions will affect to the operation of a battery charger, that are:

All these factors should be considered carefully if you want to choice and buy a battery charger that is suitable for your own demand.

Determine the correct type of the battery charger you need

To choose the right type of battery charger, you need to be equipped with the basic knowledge about the technical specifications of the type of battery you are using. Specifically, they are parameters to determine the input voltage, types of batteries and abilities to charge how many amps  per hour.

The input voltage of a conventional battery is 120 or 230 VAC. The capacity of the battery voltage is usually measured by “Ah” unit.

Some kinds of conventional batteries:

we often need the solution to add when the battery becomes dry. If you don’t fill acid solution promptly, batteries will lose the ability to charge, discharge, and be easily broken.

  • Battery without filling

It means users do not need to intervene by adding the new solution. For this product line, while still escaping gas charge but less filling product line.

It means that the air can’t escape. When the air can’t escape, the liquid in the battery can’t  “slip” out whether it was let in all postures.

There are two types of AGM battery: gel but an airtight type and gel with 100% dry type.

You can choose any types of them, however, that should be suitable for your demand and usage.

dry-agm-battery

Select the appropriate time for the battery charger is not overloaded

There are many ways to quickly make your battery become out of use (and you will be used a new battery, I’m kidding). It is very simple to find the reasons why it becomes wrong charger. One of those is that you uses wrong battery makes battery chargers become overloaded or under-charging. Overload charging can cause the battery overheat. If the battery is “filling” type the liquid inside it will quickly dry out and evaporate more. Generally, you are destroying your battery. The rate charged correctly for your battery can be calculated based on parameters “Ah”. The level of charge power is printed on the battery cover. And you should follow this number.

A safety chargeable rate is acceptable in the manufacturing industry is about 20% battery power level Ah recorded on your battery. This means that battery with a capacity of 100Ah ideal as it will be calculated at the rate of 20 ADC.

Choosing battery charger Tips Conclusion

There are many factors you need to consider before buying a battery charger. However, in this Choosing battery charger Tips, I have just focused on some mains and important factors and tips that need to look first. I expect you can apply all tips that I have shared when choosing battery charger. Hope you have a right choice.

Thank you!

12321167_449961491863709_3959870046337991044_n

An Insight into Solar Power 101 Batteries

12321167_449961491863709_3959870046337991044_n

I am receiving several wishes from readers wanting very explicit assistance on how to fix their individual solar electric structures. Numerous have by now discovered that this method is slightly similar to struggling to construct a vehicle by getting parts from a car dealer. Afore I can aid you project your private solar power system, you have to recognize that there are in fact numerous different kinds of solar power systems, for countless different functions.

Structure Categories

  • Certain solar power systems are 12-volt DC owing to the many low power RV and boating lights and machines obtainable, and do not have a function line link. These DC systems can be worked to power some DC lights in a distant lodge, or a DC well pump in a meadow for watering livestock.
  • Specific solar power systems have an inverter to transform a 12, 24, or 48-volt DC battery power into 120-volt AC power to function customary domestic applications. Various grid associated solar power systems are planned for direct linking to your service line and do not use any batteries whatsoever.
  • Hybrid solar power systems can comprise a battery group, a solar range, a generator, and even a wind turbine to deliver power always with the utility grid aiding simply as standby. Inverters and solar ranges are accessible in various different classes, voltages, and installing formations. Selected solar selections are attached on the rooftop, several on the top of a pole, and some are land installed with all requiring diverse cabling instructions.

Batteries

  • Some of the greatest misjudged fragments of a solar power system are the battery or battery group, and explicitly where our session initiates. Some solar battery banks use wet cells, similar to golf cart batteries, whereas others use sealed or gel cell batteries, and all have dissimilar temperature, fitting, and airing necessities.
  • Each battery is planned for a precise kind of charge and discharge sequence. Car batteries have reedy plates to preserve their load down, and are intended for a substantial discharge continuing a few moments, trailed by a lengthy time of sluggish re-charge.
  • Golf cart batteries have very heavy plates and are intended for periods of thick discharge daily, tailed by a quick recharge in only a few hours every night. This is comparable to the duty cycle of a domestic solar use, merely in inverse.
  • A solar battery needs to be capable to deliver extensive interludes of deep discharge every evening and night, ensued by a complete recharge in simply a few periods of sunshine every afternoon. Extremely few batteries can take a deep discharge-recharge round daily, and the 6-volt golf cart battery is the minimum costly and simplest to catch nearby.
  • As every golf cart battery balances nearly 65 pounds, there are weight concerns too because battery gas venting problems need to be considered.

If you want over the 220 amp-hr. capacities enclosed in all golf cart batteries, I advise moving to the larger “L-16” size traction battery, having a 350 amp-hour score, which could permit consuming less batteries.

Safety Measures

  • Batteries can spend above half of the charge once open to severe temperature fluctuates, therefore be assured your planned battery setting stays in a 50° to 80° F range, or you will want to insulate the battery box.
  • As liquid batteries need restocking and battery terminal maintenance to eliminate decomposition numerous spells every year, the surface expanse chosen should be capable to receive an irregular acid leak and water cleaning.
  • Battery venting is very essential, besides if you form an arena about your batteries, it should be aimed to point all vented gasses towards open-air. Be certain it is placed at the uppermost position in your battery arena where the lighter hydrogen gas will collect.
  • Be definite, it too contains a protected vent cover to bar rain and bugs. Do not place your battery bank close to a gas water heater or other exposed flame apparatus that might flare up any unintended hydrogen buildup.
  • A battery box can be made with average 2 x 4 framing structure, with pressure handled plywood coating the internal planes. A hinged upper door is necessary for intermittent battery upkeep, and must contain a gasket to inhibit gases from penetrating the chamber.
  • As batteries waste ability with lesser temperatures, your batteries had better not be positioned absolutely on an icy un-insulated solid surface.
  • Compression preserved 2 x 4s on edge, spread out every 6 inches and sheltered by a fiberglass coated concrete sheet, creates an admirable stand for your battery box. This hefty sheet matter is retailed in maximum construction hoard stores as a support behind ceramic tile work in wet shower stands, and is generally offered in reduced 2-foot by 4-foot dimensions. By watchful research, you might be capable of consuming the complete piece minus cutting or joining.

If you can pay for extra costly gel or Absorbed Glass Matte (AGM) batteries, you will have further tractability in finding your battery bank; as these batteries do not requisite to be restocked and do not usually produce dangerous smokes.

Tags:,